 |
|
||||||||||||||||||
 |
|
|
|
|
|||||||||||||||
|
|||||||||||||||||||
GENERAL INFORMATIONS 
CRYOSTRA Plus 
Synthetic granules made of polycarbonate
Polycarbonate is the composite material of our CRYOSTRA abrasive. This abrasive is for the cryogenic trimming of technical rubber composition articles. Polycarbonate has the lowest level humidity absorption and also possesses a high level of impact strength, even at high minus temperatures. CRYOSTRA is available as PENTCORN with a patented 5-edge cross-section.
Technical Data |
Grain geometry: |
Pentcorn (5-edged) | Deliverable granulations: | ||
|---|---|---|---|---|
Appearance: |
clear | 0,50 mm |
||
0,75 mm |
||||
Hardness: |
app. 95 MPa | 1,00 mm |
||
1,50 mm |
||||
Specific weight: |
1,2 g / cm³ | 2,00 mm |
||
3,00 mm |
||||
Notched impact strength: |
600 – 800 J / m | |||
Form consistency: |
-190°C bis +140°C | |||
Water absorbance: |
0,1% / 24h | |||
Chem. composition |
Copolymers made of bisphenol A and phosgene | |||
| Batch Sizes: | 25kg cartons on one-way palettes for every 400 kg, shrink-wrapped in foil. |
|---|
